top of page

Load data for .375 Fl N.E. 2 1/2 + .375 | 270gr | Speer Boat Tail Soft Point

Recommended Powder(s): none

.375 Fl N.E. 2 1/2 + .375 | 270gr | Speer Boat Tail Soft Point

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.375 | 270gr | Speer Boat Tail Soft Point
Manufacturer SKU:
2472
Bullet Weight:
270gr | 17.5g
Bullet Diameter:
0.375" | 9.52mm
Bullet Length:
1.310" | 33.3mm
Caliber:
.375 Fl N.E. 2 1/2 load data
Case Length (l3):
2.500" | 63.5mm
Cartridge Length (C.O.L.):
3.201" | 81.3mm
Seated Depth:
0.609" | 15.5mm
Shank Seated Depth:
0.434" | 11.0mm
Case Capacity:
68.0 Grains of Water | 4.42 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
31908 psi | 2200 bar
LID:
LID_B6245_C540
Last updated:
2025-01-01
Recommended Twist Rate:
1:17 - 1:14

Load data for 24 loads in caliber .375 Fl N.E. 2 1/2 with .375 | 270gr | Speer Boat Tail Soft Point bullet and 12 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 2495
<<locked>>
85%
28079
88%
**98
98%
[Accurate 2520]*
<<locked>>
84%
28427
89%
**78
93%
Accurate 4064
<<locked>>
91%
28413
89%
**01
95%
IMR 3031
<<locked>>
87%
28311
89%
**85
96%
[Lovex D073.6]*
<<locked>>
86%
28427
89%
**78
93%
[Norma 202]*
<<locked>>
84%
28210
88%
**46
94%
SNPE Vectan Tubal 5000
<<locked>>
88%
28210
88%
**83
95%
[Shooters World Match Rifle]*
<<locked>>
86%
28427
89%
**78
93%
Vihtavuori N133
<<locked>>
84%
28616
90%
**96
97%
Vihtavuori N135
<<locked>>
93%
28181
88%
**52
97%
[Vihtavuori N140]*
<<locked>>
86%
28282
89%
**26
94%
[Vihtavuori N540]*
<<locked>>
86%
28253
89%
**49
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 2495
<<locked>>
81%
24221
76%
**03
96%
[Accurate 2520]*
<<locked>>
81%
25556
80%
**09
91%
[Accurate 4064]*
<<locked>>
81%
20479
64%
**88
90%
[IMR 3031]*
<<locked>>
81%
23699
74%
**57
93%
[Lovex D073.6]*
<<locked>>
81%
24091
76%
**70
91%
[Norma 202]*
<<locked>>
81%
26020
82%
**90
93%
[SNPE Vectan Tubal 5000]*
<<locked>>
81%
23163
73%
**55
92%
[Shooters World Match Rifle]*
<<locked>>
81%
24091
76%
**70
91%
Vihtavuori N133
<<locked>>
81%
26542
83%
**47
96%
[Vihtavuori N135]*
<<locked>>
81%
20117
63%
**29
92%
[Vihtavuori N140]*
<<locked>>
81%
24613
77%
**34
92%
[Vihtavuori N540]*
<<locked>>
81%
24294
76%
**44
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page